Windshield Crack Repair Versus Replacement

Windshield Crack Repair Versus Replacement

Blog Article

There are many instances when one needs to pay attention to his Car Windshield. While driving on the road, sometimes a small pebble or gravel can make a crack in your windshield. Serious accidents can take place if care is not taken immediately. Nicks and cracks pose a potential danger to the windshield. But this does not mean you need to replace the whole windshield. Replacing the windshield leads to a big expense and can hit hard on the pocket. For this there is a repair option which many glass specialists recommend. Repairing of the windshield is a comparatively less expensive procedure and takes much less time. You can check the amount of damage on your glass and then decide whether it has to repaired or replaced.

The reason that cracks often start on the edges of the automobile windshield chip repair is because the edges are the structurally weakest area. The frit is on the glass because it keeps the ultraviolet light from the sun away from the polyurethane seal that holds the windshield in the frame. Without the frit, the windshield would quickly start leaking or just pop out of the frame of the car.



If you have a leak it's very frustrating. But spending thousands of dollars on interior pieces or your electrical system will make you even more frustrated. You need to call your auto glass company and have it fixed immediately.

If your vehicle really needs a windshield repair, make sure to get high quality glass. Have it installed properly and choose a good adhesive because it is essential in windshield installation.

As a windshield installer for the past thirty five years, let me give you three good reasons not to repair your windshield. As windshield repair is a gimmick in my opinion.

#3) Non-Complicated Equipment! It seems as though just about every company is trying to come up with another gimmick (bells & whistles) to add to their repair system. But, by over complicating the process they are making it difficult for new repair techs to get the hang of the repair process.

But the best way to fix a leak is completely removing the glass and shooting a new seal. This is the only way to truly see what is happening. If the glass is removed a technician can 100% fix the underlying issue. This option may require the purchase of a new molding. Also your auto glass company will most likely require you to purchase a new glass if the old glass breaks upon removal.